Generation and selection of likely interpretations during plan recognition in task-oriented consultation systems

This paper presents a mechanism which infers a user's plans from his/her utterances by directing the inference process towards the more likely interpretations of a speaker's statements among many possible interpretations. Our mechanism uses Bayesian theory of probability to assess the likelihood of an interpretation, and it complements this assessment by taking into consideration two aspects of an interpretation: its coherence and its information content. The coherence of an interpretation is determined by the relationships between the different statements in the discourse. The information content of an interpretation is a measure of how well defined the interpretation is in terms of the actions to be performed on the basis of this interpretation. This measure is used to guide the inference process towards interpretations with higher information content. The information content of an interpretation depends on the specificity and the certainty of the inferences in it, where the certainty of an inference depends on the knowledge on which the inference is based. Our mechanism has been developed for use in task-oriented consultation systems. The particular domain that we have chosen for exploration is that of travel booking.     

Detection of failure sites by focused ion beam and nano-probing in the interconnect of three-dimensional stacked circuit structures

Focused ion beam (FIB) and nano-probing were applied for failure analysis of three-dimensional stacked circuits with copper through-silicon-vias between the stacked chips. The failure analysis was done after high temperature storage and thermal cycling tests. Passive voltage contrast in FIB allowed to pinpoint the open sites. FIB cross-sections showed the presence of opens at the bottom of the copper vias. The failure cause was suspected to be an interlayer particle, which was confirmed by optical profilometry. Nano-probing was used on another sample to pinpoint the failure location through the measurement of the local resistance within the daisy chains. The failure was traced out to be related with surface contamination.     

Natural convection from narrow horizontal plates at moderate Rayleigh numbers

The present work deals with the natural convection flow and heat transfer from a horizontal plate cooled from above. Experiments are carried out for rectangular plates having aspect ratios between φ=0.036 and 0.43 and Rayleigh numbers in the range 290?Ra_w?3.3×10⁵. These values of Ra_w and φ have been selected below those commonly considered in previous research in view of a future application to the design of printed circuit boards. The plates are made of two different metals, copper and steel. The choice of a metal is relevant to the present problem because the plates are heated by means of an electric current. Important variations of the surface temperature are observed along the transverse direction for the steel plates. The surface of the copper plates is almost isothermal because of the high thermal conductivity of the metal.Calculations for a semi-infinite plate are carried out to predict the transverse profiles of the surface temperature and heat flux and to visualize the structure of the flow. Three-dimensional calculations are also used at a qualitative level to observe the changes in the flow structure due to the finite length of the plate. Present results are compared with both previous experimental work and analyses that are based on boundary layer theory. It is shown that analyses for an infinite boundary layer are not completely applicable to the present problem because of its different physics. The most relevant feature of the natural convection flow, which is not predicted by boundary layer analyses, is a thermal plume rising near the center of the plate.Present heat transfer results differ from previous experimental work because of the lower Rayleigh numbers and aspect ratios investigated here. The Nusselt number is found to depend on Ra_wⁿ, with the exponent n=0.17 being lower than most of the values reported in the literature. This comparatively low value is related to the transverse conduction of heat through the air, which becomes increasingly significant as Ra_w approaches zero. It is shown that such a low-Ra_w effect can be accounted for in a physically consistent manner by adding a constant term to the heat transfer correlation. On the other hand, it is found that the Nusselt number does not significantly depend on the aspect ratio in the range of φ investigated contrary to what has been previously reported for wider plates.     

Multiwavelength InGaAs/InGaAsP strained-layer MQW-laser array usingshadow-masked growth

A simple technique for fabricating multiwavelength laser arrays is presented. The lateral variations in bandgap (or emission wavelength) between the different lasers are obtained by the use of shadow-masked growth. The shadow masked growth results in variations in thickness (and to a lesser extent, in composition) over the substrate. In combination with a multiquantum well (MQW) active region, this gives the required bandgap variations. By varying the window width in the shadow mask between 10 μm and >500 μm it was possible to obtain a wavelength span of 130 nm centered around 1.55 μm. The strained-layer-ridge MQW Fabry-Perot lasers showed a constant threshold current (around 70 mA for an 11-μm×500-μm stripe)     

Consumption of foods and micronutrients and the risk of cancer of the biliary tract

BACKGROUND: Gallstones and obesity have been suggested as risk factors for cancer of the biliary tract. Since both factors are related to diet, we studied the relationship between dietary intake and the cancer of interest in a population-based case-control study. METHODS: The study population comprised 111 patients and 480 controls. Food intake was assessed by means of a semiquantitative food frequency questionnaire. Estimates of the intake of foods and micronutrients were obtained from cases and controls themselves (direct respondents) or from relatives (indirect respondents). Participants were categorized into tertiles of intake. Risk ratios were estimated by logistic regression analysis. RESULTS: The major findings are a monotonic decrease in risk associated with the consumption of vegetables (ORs 1.0, 0.7, 0.4, P value trend < 0.01) and a monotonic increase in risk associated with sugar added to drinks and desserts (ORs 1.0, 1.3, 2.5; P value trend < 0.01). CONCLUSIONS: The finding on added sugar corresponds to our earlier report that the group monosaccharides and disaccharides is a potential risk factor for this cancer. Sugar may influence bile composition through lipoprotein metabolism. The protective effect of vegetables is in accordance with the reported inverse relationship between vegetables and many epithelial cancers of the alimentary tract.     

Congenital pulmonary lymphangiectasis with chylothorax: a heterogeneous lymphatic vessel abnormality

We describe the generation of a new antipeptide antibody that binds to the centromeric region of human mitotic chromosomes. This antibody was raised against a synthetic peptide corresponding to the 481-493 amino acid sequence of the human CENP-B autoantigen. Immunofluorescence analysis revealed that this anti-CENP-B serum showed an identical pattern to the human CREST anticentromere autoantibody in both mitotic cells and interphase nuclei. Immunoblotting showed that this antibody reacts with the recombinant human CENP-B autoantigen, indicating that it is directed to the 80-kDa centromere polypeptide. We have used this serum to determine, by indirect immunofluorescence, whether CENP-B is conserved in different mammalian species. Surprisingly, the human antipeptide antibody does not react with the centromeric proteins of cultured mouse, hamster, or Indian muntjac cells. Because the CENP-B gene has been cloned in human and mouse, our results suggest that the CENP-B epitope used as an immunogen in this study is not ubiquitous in mammalian cells, and that we have most probably established a monospecific antibody to the human centromere.     

A 4/7 kHz audio bandwidth selectable digital phone interface (DPI)chip with on-chip analog functions and modem

The Digital Phone Interface (DPI) is designed for a new generation of digital telephone terminals for private exchanges, This circuit gives a total solution for all telephone functions, thereby including DSP functions, voice coding/decoding and analog front end, signal generators for DTMF and ringing, a modem for data transfer between terminal and exchange and a multitude of interfaces to communicate to the external world. Besides the normal earpiece micro and speaker, handsfree operation is available by using a selectable input low-noise microphone amplifier and an additional 50 Ω mWLS driver. For the handsfree operation, a digital AGC and anti-oscillation (anti-larsen) function is implemented. The line modem generates a modified RTZ (WAL2) code and is able to cover distances up to 1.5 km. In addition, the component is extensible with external signal processing modules (echo cancelling) and is also able to transfer a 7 kHz speech bandwidth. The device is a mixed analog/digital design produced in a 1.2 μm CMOS technology on 46 mm ² die area and consumes 200 mW     

The effect of Cu-rich sub-layer on the increased corrosion resistance of Cu-xZn alloys in chloride containing borate buffer

The electrochemical behaviour of Cu-xZn alloys, as well as their constituent metals, in a borate buffer containing chloride ions in the molar range from 0.01 to 1 M are studied. Characteristics of these materials under anodic polarization are compared and the composition and morphology of the corrosion products formed in the course of polarization experiment are analysed by SEM and EDS. X-ray photoelectron spectroscopy and electrochemical impedance measurements are used for characterization of the surface layers formed on Cu, Zn and Cu-40Zn alloy during 2-h immersion at E_oc in a borate buffer containing two different concentrations of chloride ions. New aspects of the behaviour of brass under E_oc condition are revealed. The improved corrosion resistance of brass in chloride media, if compared to zinc metal, is attributed to a Cu-rich layer formed by the selective dissolution of zinc. Based on the results, a structural model describing the improved corrosion resistance of Cu-40Zn alloy with respect to Zn metal is proposed.